C*Pix SDC2000 Instrukcje Operacyjne Pobierz pdf (Strona 332)

SDC 2002

6. Maintenance

6-10

Operating Instructions - Rev. 1 / 6.2003

6.3.4. CLEAN THE HEAT ABSORBING FILTER

10. Press the locking spring of the heat absorbing filter to the left and pull it up and

out (later mounting position is defined).

11. Clean the heat absorbing filter with a cleaning cloth.

12. Insert condenser lens 1, infrared filter and heat absorbing filter, avoid finger

prints.

6.3.5. CLEAN THE LIGHT CONTROL (FAST APERTURE)

13. The iris of the light control can be manually turned into the light path. For this

purpose, put one finger into the upper left opening of the light control and ro-

tate the iris coupler (see Fig.609: ).

14. Check the iris of the light control for dust accumulation.

Remove dust with a cleaning cloth or a compressed air (Dustaway).

6.3.6. CLEAN THE FILTERS OF THE FILTER WHEEL

Light control

Filter wheel

Filter

Fastening bracket

Iris coupler

(Fast aperture)

Iris

Fig.609: Light control (fast aperture) and filter wheel

15. Turn the filter wheel by hard to give access to the filter to be cleaned.

16. Move the two fastening brackets of the filter to the side and remove the filter

(note the mounting position as the edges are different).

17. Clean the filter with a cleaning cloth.

18. Insert the filter, avoid finger prints.

The fastening brackets have to lock in with an audible click.

19. Repeat above procedure until all filters are clean.

1 2 ... 327 328 329 330 331 332 333 334 335 336 337 ... 365 366

Brak uwag

C*Pix SDC2000 Instrukcje Operacyjne Strona 332